Like this:

RHINESTONES HEAT TRANSFERS DESIGN SERVICES

I can design any pattern for you and in any specific rhinestone size you need for your transfer. Anyone that has a vinyl cutter can now cut their own templates without owning special software or a special cutter.

General Setup Guide lines:

For words, you are probably better off going with a smaller stone (SS6 or SS10) and use more of them … your designs will “read” better. Larger rhinestone sizes will require fewer stones, but will be harder to read. For Artwork, logos, etc., Please indicate Stone Size, stone placement.

• Lettering in Rhinestone Transfers should be at least 1″ tall. The maximum width that can be applied to most shirts is about 8-9″…
• Choose simple fonts… Block lettering is much easier to read than fancy fonts. If you must use a Script font, use a very simple one. Fancy fonts create confusion to the eye when seen as dots. Rhinestone transfers are dots of rhinestones not continuous lines.

Rough guide to number of rhinestones used:

• 1″ letters will use about 18-20 or so rhinestones per letter in a SS 6 Size.
• 1 1/2″ Letters will use about the same number in a SS 10 size.
• 2″ Letters will use about 25 rhinestones per letter in a SS 10 Size
• More or less rhinestone can be used, the final look of the transfer is what you are after.

Rhinestone Transfer design services are based on an hourly rate of $9.00 per hour.

Advertisement